You are using a version of Internet Explorer (version 8 and / or older) or the compatibility mode, which does not support some functionalities of the site you're viewing. This page can be displayed correctly you therefore may not. In order to use the full functionality of the site is a current Internet Explorer or another browser (eg: Google Chrome, Firefox) necessary.
HomeServiceDownloadsSoftware > Turb® 430 IR/T

Software and Updates for Turb® 430 IR/T

Download the latest version of software for turbidity meters Turb® 430 IR and Turb® 430 T

Firmware Update – V2.05

Update of the Turb® 430 IR and Turb® 430 T turbidity meter firmware –
from the beginning: reliable and precise turbidity measurement from drinking water to wine.
However, perform updates to make sure your firmware and software is always uptodate.

Note: After the update the photometer is only compatible with LSdata, version 4.00 or higher.

Download and installation notes:

The files have been compressed into a zip archive (*.zip). For installation please follow the instructions below.

Download and installation

  • Store the downloaded file (exe file or zip archive) into a directory of your choice
  • If necessary, decompress the exe file contained in the zip archive in a directory of your choice
  • Double-click the Turb430_V2_05.exe file
  • Subsequently, follow the instructions of the installation program

Updating the turbidity meter via the integrated RS 232 interface requires the following equipment:

  • PC with Windows XP, 2000, NT4 (Service Pack 6), ME, or 98 SE
  • Turbidity meter Turb 430 IR/T
  • AK 540/B cable (order no. 902 842) or LabStation with interface cable

Carrying out the update:

  • Connect the serial interfaces of the PC and turbidimeter using the interface cable
  • Switch on the PC and instrument
  • Start the update program via the Windows start menu (…/WTW/Update Turb430/Update)
  • Follow the program instructions. The program automatically recognizes the connected turbidimeter and guides you through all further steps.
    After the last confirmation for the update, the new software and/or new programs are loaded into Turb 430.
    The entire update procedure takes approx. 4 minutes.
  • If any problems arise, please contact our customer service personnel:
    Tel: +49 (0) 881/183-321. 

Download ZIP archive:

LSdata – Version 4.00 (Update)

Free update of the WTW data management software LSdata for pHotoFlex® and Turb® 430 series.

Download and installation notes:

Administrator rights on PC required:

  • Save the downloaded zip file in a directory of your choice
  • Unzip the files contained in the zip archive into a directory of your choice
  • Run the following exe file depending on the language version of the installed LSdata software:

    • German:  LSdata_Upgrade_Ger_V400.exe
    • English:  LSdata_Upgrade_Eng_V400.exe
    • French:  LSdata_Upgrade_Fre_V400.exe
    • Spanish:  LSdata_Upgrade_Spa_V400.exe

  • Then, follow the instructions of the installation program.

Version history – innovations

  • Changes in version 4.00:

    • Detection of devices with firmware version 2.00 or higher.
    • Expansion of the number of proprietary programs (methods) with pHotoFlex® STD to 50.   

Download ZIP archive:

This may interest you:

Are you interested
in signing up for the free
WTW newsletter?
Newsletter
registration

WTW Newsletter Registration

Any Question?
We advise
you gladly!
Contact

WTW Contact