MLU-2210 |
Measuring module internal pH (PCB to be installed into MULTILINE 1000) to feed the measuring signal into the MULTILINE 1000 monitor via a BUS cable) |
190026 |
MLU-2215 |
Measuring module internal ORP (PCB to be installed into MULTILINE 1000) |
190051 |
MLU-2260 |
Measuring module internal chlorine amperometric (PCB to be installed into MULTILINE 1000) |
290051 |
MLU-2220 E |
Measuring module external conductivity (external PCB with metal housing to feed the measuring signal into the MULTILINE 1000 monitor via a BUS cable) |
390025 |
MLU-2220 |
Measuring module internal (PCB to be installed into MULTILINE 1000) |
390026 |
MLU-2000 E-C |
External module for 4 x 0/4–20 mA outputs |
480210 |
MLU-2260 E-C |
External module for 1 x 0/4–20 mA input into MULTILINE 1000 of the Turb 2000 series or Chlorine 3000 |
480262 |
FCML 412 N |
pH-Wert independent chlorine electrode (1 m cable) as per the electro-chemical principle, suitable measurement of free clorine in drinking water and pool water. Measuring range: 0-2 mg/l, pH range 4–9 |
201187 |
TCML N |
Chlorine electrode (1 m cable) as per the electro-chemical principle, suitable for measurements of total chlorine in drinking water and pool water. Measuring range: 0-2 mg/l |
201192 |
FCML 68 |
Chlorine electrode (1 m cable) as per the electro-chemical principle, suitable for measurements of free chlorine in drinking water and pool water. Measuring range: 0–2 mg/l, pH range 6–8 |
201195 |
ZBK-FCML 412 N |
Maintenance set for chlorine sensor FCML 412 N: 100 ml electrolyte, 1 replacement cap |
205246 |
ZBK-FCML 68 |
Maintenance set for chlorine sensor FCML 68: 100 ml electrolyte, 1 replacement cap |
205248 |
ZBK-TCML N |
Maintenance set for chlorine sensor TCML N: 100 ml elekcrolyte, 1 replacement cap |
205245 |
SenTix® ML 70 |
pH single-rod measuring chain with glass shaft, glass etched ring diaphragm, gel electrolyte, S7 screw plug head, PG 13.5 thread |
104100 |
SenTix® MLORP |
ORP single-rod measuring chain with glass shaft, glass etched ring diaphragm, gel electrolyte, platinum head, S7 plug head; PG 13.5 thread |
104150 |
TFK 5000 |
Temperature sensor with 1 m cable, Pt 1000 for Multiline 1000 and monitor pH 5000; open cable ends |
104151 |
AK-S7/1 |
Coaxial cable ORP/pH-free end/S7 connector, 1 m. For MULTILINE 1000, measuring panel included in the delivery |
108150 |
TEP 10 Trace |
Technical buffering solution, 1 bottle with 1 l : pH 10,01 |
108703 |
TPL 4 |
Technical buffering solution, 1 bottle with 250 ml: pH 4.01 |
108800 |
TPL 7 |
Technical buffering solution, 1 bottle with 250 ml: pH 7.00 |
108802 |
TPL 10Trace |
Technical buffering solution, 1 bottle with 250 ml: pH 10,01 |
108805 |
PL 4 |
Standard (DIN/NIST) buffering solution, 1 bottle with 250 ml: pH 4,006 /4,01 |
109110 |
PL 7 |
Standard (DIN/NIST) buffering solution, 1 bottle with 250 ml: pH 6,865 /6,87 |
109120 |
PL 9 |
Standard (DIN/NIST) buffering solution, 1 bottle with 250 ml: pH 9,180 /9,18 |
109130 |
RH 28 |
ORP buffering solution pH 7, UH = 427 mV (CH), 1 bottle with 250 ml |
109740 |
E-SET Trace |
Calibration set, 6 bottles with 50 ml calibration and control standard ea., KCl 0,01 mol/l, 1413 μS/cm at 25 °C, traceable to PTB/NIST. |
300572 |
LR ML |
Conductivity measuring cell, 1 m fixed cable, 2 graphite electrodes; - 5–80 °C, Polysulfon shaft, measuring range: 100 μS/cm – 20 mS/cm, temperatur measurement with Pt 1000; PG 13.5 thread |
301150 |
Oxi ML 41 module |
Measuring module for the measurement of dissolved oxygen to build up the drinking water measuring panel with the monitor MULTILINE 1000. Includes, the sensor, measuring module, accessories kit and flow fitting |
201930 |
Oxi ML 41 |
Oxygen probe (1 m cable) measuring range: 0-20 mg/l or 0-200 %; electro-chemical sensor. Temperature range: -5 – 45°C, with temperature sensor Pt 1000; open cable ends |
201931 |
ZBK-Oxi ML 41 |
Accessories kits for the oxygen electrode Oxi ML 41. Includes 3x replacement membrane heads and 6 vials of electrolyte |
202300 |
DFL-G1/4 |
Flowmeter with frequency output, PVC, DN10 |
480265 |
D-CL |
Flow fitting for chlorine sensors FCML 412, FCML 68 and TCML. 1 installation point, screw connection DN 10 |
201150 |
D 220 |
Skewed flow fitting to hold conductivity or oxygen electrodes with PG 13.5 thread. Material: PVC |
401993 |
D 222/3 |
Flow fitting to hold pH, conductivity, ORP electrodes with PG 13.5 thread. Material: PVC |
401995 |
ZBS DW-Panel |
Small parts set: 3 RV seals, 4 screw clamps for MULTILINE 1000, 1 blind plug, 4 blind washers PG 7 and 4 blind discs PG 9 for DW panel |
860100 |
Pr-DN10 |
Pressure reducer input pressure max. 16 bar, output pressure 1.5-6 bar, adjustable. DN10, for DW panel with MULTILINE 1000 |
904000 |
Do-DN10 |
Dosing ball valve to regulate the flow volume of 0–90 l/min, DN10, PVC |
904005 |
Cal/C |
Calibration console for DW panel, PVC white |
907010 |