You are using a version of Internet Explorer (version 8 and / or older) or the compatibility mode, which does not support some functionalities of the site you're viewing. This page can be displayed correctly you therefore may not. In order to use the full functionality of the site is a current Internet Explorer or another browser (eg: Google Chrome, Firefox) necessary.

Single parameter system CL 298/P

WTW - Single parameter system CL 298/P

CL 298/P - single parameter system ready to operate to measure free or total chlorine, environmentally friendly, sanitary and reliable

  • sanitary and well-structured – premounted on specially coated panel
  • environmentally friendly - no use of chemicals
  • reliable - membrane protects from contamination of electrodes

The drinking water panel CL 298/P is a system that is ready to operate, with monitor Cl 298, integrated PID regulator, premounted piping and special freely selectable probes to measure free and total chlorine. Therefore, nothing is stopping you from measuring drinking water or pool water.

Variations

Model Description Order no.
CL 298/P - 230 VAC Ready to operate measuring panel to measure free or total chlorine, analog monitor 2 current outputs and MODBUS interface, with automatic temperature compensation (Pt1000), 230 VAC 801260
CL 298/P Flow - 230 VAC Like the CL 298/P, but with FlowControl to monitor the flow volume 801261

Technical Data

Panel
Dimensions 1100 mm x 350 mm x 13 mm (HxWxD)
Material PVC hard foam, foamed, white
Monitor
Temperature measurement Pt1000 (integrated in sensor)
Temperatur compensation -10 °C ... +130 °C
Analog outputs 2 x 0(4) … 20 mA
2 x Relays
Housing Aluminium housing for wall mounting, protection IP 65
Dimensions 160 x 130 x 70 mm (WxHxD)
Power supply 100 … 240 V AC
or 18 … 36 V DC
Sensors
Measuring range FCML 412 0.00 … 2.00 mg/l
Conditions of use FCML 412 0 … 45 °C, 4 … 9 pH
Measuring range FCML 68 0.00 … 2.00 mg/l
Conditions of use FCML 68 0 … 45 °C, 6 … 8 pH
Measuring range TCML 0.00 … 2.00 mg/l
Conditions of use TCML 0 … 45 °C, 4 … 12 pH

Accessories

Model Description Order no.
FCML 412 pH-Wert independent chlorine electrode (1 m cable) as per the electro-chemical principle, suitable measurement of free clorine in drinking water and pool water. Measuring range: 0-2 mg/l, pH range 4–9 201185
TCML Chlorine electrode (1 m cable) as per the electro-chemical principle, suitable for measurements of total chlorine in drinking water and pool water. Measuring range: 0-2 mg/l 201190
FCML 68 Chlorine electrode (1 m cable) as per the electro-chemical principle, suitable for measurements of free chlorine in drinking water and pool water. Measuring range: 0–2 mg/l, pH range 6–8 201195
ZBK-FCML 412 Maintenance set for chlorine sensor FCML 412: 100 ml electrolyte, 1 replacement cap 205247
ZBK-FCML 68 Maintenance set for chlorine sensor FCML 68: 100 ml electrolyte, 1 replacement cap 205248
ZBK-TCML Maintenance set for chlorine sensor TCML: 100 ml elekcrolyte, 1 replacement cap 205249

Downloads

Are you interested
in signing up for the free
WTW newsletter?
Newsletter
registration

WTW Newsletter Registration

Any Question?
We advise
you gladly!
Contact

WTW Contact