Analog pH/ORP fittings
SensoLyt® – pH/ORP armature with lightning protection, integrated preamplifier and temperature sensors as well as self-diagnostic function
- Safe operation by sensor check function for glass breakage detection
- Reliable measured values thanks to integrated temperature sensor
- Save time due to the simple measuring chain replacement
The system concept of the SensoLyt® series consists of one fitting and the matching pH/ORP measuring chain. The unlimited number of possible combination of fittings and measuring chains for the different measuring ranges allows the correct solution for every application. The robust design, the integrated temperature sensor and the automatic self diagnosis ensure a safe operation and reliable measured results.
The standard fitting SensoLyt® 700 contains a preamplifier and a temperature sensor. The signal transfer is therefore possible even across long cable stretches. In case of glass breakage, the automatic monitoring of the pH measuring chain (SensCheck) generates a message on the connected pH monitor.
Only as replacement armature for analog monitors of the Ecoline® or QuadroLine® series. Still available as digital version (IQ Sensor Net System 181).
You expect the performance of the SensoLyt® 700 and can live without automatic self diagnosis. Then benefit from the price advantage of the SensoLyt® 690.
Only as replacement armature for analog monitors of the Ecoline® or QuadroLine® series.
The model SensoLyt® 650 is designed as a passive fitting without preamplifier for the high ohm measuring process. The fitting is connected directly to the high ohm input of the WTW ph monitor pH 298 NTC.
|SensoLyt® 700-7||pH/ORP with low ohm signal transfer, SensCheck function, integrated T sensor and preamplifier, cable length 7 m||109191|
|SensoLyt® 700-15 SW||Like SensoLyt® 700-7, but cable length 15 m, salt water version||109196|
|SensoLyt® 700-SO||Like SensoLyt® 700-7, but cable length is freely selectable||109193V|
|SensoLyt® 690-7||Like SensoLyt® 700, without SensCheck function, cable length 7 m||109180|
|SensoLyt® 690-SO||Like SensoLyt® 700, without SensCheck function, cable length freely selectable||109181V|
|SensoLyt® 650-7||pH/ORP fitting with high ohm signal transfer and integrated T sensor, cable length 7 m||109195|
|Model||SensoLyt® 700||SensoLyt® 690||SensoLyt® 650|
|Signal output||Low ohm||Low ohm||High ohm|
|Temperature measurement||Integrated NTC
0 … +60 °C
|Operating temperature||0 … +60 °C||_H||_H|
|Electrical connection||Screw plug
|Open cable ends|
|SensoLyt® 700-SK||Protective basket for SensoLyt®Measuring chains in SensoLyt®- Fitting to protect against pushes/impacts||109194|
|ADA/AMPH||Adapter for the direct connection of a SensoLyt® 690/700 to a Quadroline® pH 296 monitor||108592|
|TEP 4||Technical buffering solution: pH 4,01||108700|
|TEP 7||Technical buffering solution: pH 7,00||108702|
|TEP 10 Trace||Technical buffering solution: pH 10.01||108703|
|TEP 10||Technical buffering solution: pH 10,00||108704|
|RH 28||ORP buffering solution: pH 7, UH = 427 mV (CH)||109740|
|SensoLyt® SEA||pH single measuring chain for strongly contaminated wastewater, to be installed into a SensoLyt® Fitting, measuring range 2 … 12 pH||109115|
|SensoLyt®ECA||pH single rod measuring chain for normal contaminated wastewater, for the installation into SensoLyt® Fitting, measuring area 2 … 12 pH||109117|
|SensoLyt®SEA-HP||pH single rod measuring chain for the use in increased pressure/temperature conditions, to be installed into the SensoLyt® Fitting, measuring range, measuring range 4 … 12 pH||109118|
|SensoLyt®DWA||pH single rod measuring chain for drinking water applications, for the installation into the SensoLyt® Fitting, measuring range 0 … 14 pH||109119|
|SensoLyt® PtA||ORP single rod measuring chain for strongly contaminated wastewater, for the installation into the SensoLyt® Fitting, measuring range ±2000 mV||109125|