You are using a version of Internet Explorer (version 8 and / or older) or the compatibility mode, which does not support some functionalities of the site you're viewing. This page can be displayed correctly you therefore may not. In order to use the full functionality of the site is a current Internet Explorer or another browser (eg: Google Chrome, Firefox) necessary.

Analog pH/ORP fittings

WTW analog pH/ORP fitting SensoLyt® 700
WTW analog pH/ORP fitting SensoLyt® 650-7

SensoLyt® – pH/ORP armature with lightning protection, integrated preamplifier and temperature sensors as well as self-diagnostic function

  • Safe operation by sensor check function for glass breakage detection
  • Reliable measured values thanks to integrated temperature sensor
  • Save time due to the simple measuring chain replacement

The system concept of the SensoLyt® series consists of one fitting and the matching pH/ORP measuring chain. The unlimited number of possible combination of fittings and measuring chains for the different measuring ranges allows the correct solution for every application. The robust design, the integrated temperature sensor and the automatic self diagnosis ensure a safe operation and reliable measured results.

SensoLyt® 700
The standard fitting SensoLyt® 700 contains a preamplifier and a temperature sensor. The signal transfer is therefore possible even across long cable stretches. In case of glass breakage, the automatic monitoring of the pH measuring chain (SensCheck) generates a message on the connected pH monitor.
Only as replacement armature for analog monitors of the Ecoline® or QuadroLine® series. Still available as digital version (IQ Sensor Net System 181).

SensoLyt® 690
You expect the performance of the SensoLyt® 700 and can live without automatic self diagnosis. Then benefit from the price advantage of the SensoLyt® 690.
Only as replacement armature for analog monitors of the Ecoline® or QuadroLine® series.

SensoLyt® 650
The model SensoLyt® 650 is designed as a passive fitting without preamplifier for the high ohm measuring process. The fitting is connected directly to the high ohm input of the WTW ph monitor pH 298 NTC.

Variations

Model Description Order no.
SensoLyt® 700-7 pH/ORP with low ohm signal transfer, SensCheck function, integrated T sensor and preamplifier, cable length 7 m 109191
SensoLyt® 700-15 SW Like SensoLyt® 700-7, but cable length 15 m, salt water version 109196
SensoLyt® 700-SO Like SensoLyt® 700-7, but cable length is freely selectable 109193V
SensoLyt® 690-7 Like SensoLyt® 700, without SensCheck function, cable length 7 m 109180
SensoLyt® 690-SO Like SensoLyt® 700, without SensCheck function, cable length freely selectable 109181V
SensoLyt® 650-7 pH/ORP fitting with high ohm signal transfer and integrated T sensor, cable length 7 m 109195

Technical Data

Model SensoLyt® 700 SensoLyt® 690 SensoLyt® 650
Integrated preamplifier Yes Yes No
Signal output Low ohm Low ohm High ohm
SensCheck function Yes No No
Temperature measurement Integrated NTC
0 … +60 °C
_H _H
Operating temperature 0 … +60 °C _H _H
Electrical connection Screw plug
7-pin
Screw plug
7-pin
Open cable ends

Accessories

Model Description Order no.
SensoLyt® 700-SK Protective basket for SensoLyt®Measuring chains in SensoLyt®- Fitting to protect against pushes/impacts 109194
ADA/AMPH Adapter for the direct connection of a SensoLyt® 690/700 to a Quadroline® pH 296 monitor 108592
TEP 4 Technical buffering solution: pH 4,01 108700
TEP 7 Technical buffering solution: pH 7,00 108702
TEP 10 Trace Technical buffering solution: pH 10.01 108703
TEP 10 Technical buffering solution: pH 10,00 108704
RH 28 ORP buffering solution: pH 7, UH = 427 mV (CH) 109740
SensoLyt® SEA pH single measuring chain for strongly contaminated wastewater, to be installed into a SensoLyt® Fitting, measuring range 2 … 12 pH 109115
SensoLyt®ECA pH single rod measuring chain for normal contaminated wastewater, for the installation into SensoLyt® Fitting, measuring area 2 … 12 pH 109117
SensoLyt®SEA-HP pH single rod measuring chain for the use in increased pressure/temperature conditions, to be installed into the SensoLyt® Fitting, measuring range, measuring range 4 … 12 pH 109118
SensoLyt®DWA pH single rod measuring chain for drinking water applications, for the installation into the SensoLyt® Fitting, measuring range 0 … 14 pH 109119
SensoLyt® PtA ORP single rod measuring chain for strongly contaminated wastewater, for the installation into the SensoLyt® Fitting, measuring range ±2000 mV 109125

Downloads

Are you interested
in signing up for the free
WTW newsletter?
Newsletter
registration

WTW Newsletter Registration

Any Question?
We advise
you gladly!
Contact

WTW Contact